Basic Info.
Model NO.
Inconel 600
Special Use
High-strength Steel Plate, Wear Resistant Steel, Silicon Steel, Cold Heading Steel, Free Cutting Steel, Mold Steel
Application
Boiler Plate
Thickness
0.5-100mm
Width
6-2000mm
Length
10-6000mm
Material
201 301 304 316 316L 310S 321 410 420 430, etc.
Processing Service
Bending, Welding, Decoiling, Punching, Cutting
Transport Package
Wooden Pallet or According to Customer Request
Specification
0.5-100mm or customized
Trademark
CJ
Origin
China
HS Code
7505120000
Production Capacity
5000 Tons/Month
Product Description
| Product classification:Inconel | ||||||||||||
| Material:Inconel 600 | ||||||||||||
| Corresponding Brand | ||||||||||||
| High temperature new name | High temperature old name | New name for corrosion resistance | Corrosion resistant old name | National brand number | ||||||||
| NS3102 | OCr15Ni75Fe | |||||||||||
| JIS | ASTM | UUNS,SAE | DIN | EN | ||||||||
| Inconel600 | N06600 | 726LC,2.4817 | ||||||||||
| Chemical Composition | ||||||||||||
| % | C | Si | Mn | P | S | Cr | Ni | Co | Fe | |||
| Min | 14 | allowance | 6 | |||||||||
| Max | 0.1 | 0.5 | 0.1 | 0.03 | 0.015 | 17 | 0.04 | 10 | ||||
| Physical Property | ||||||||||||
| Density g/cm³ | Magnetism | Thermal conductivity/w/(m.k) | Resistivity | Specific heat capacity | Coefficient of linear expansion | |||||||
| 100~900ºC | ºC)/(Ω.mm2/m2 | ºC)/J/(kg.k)ºC | /(10-6/k) | |||||||||
| 20~900ºC | ||||||||||||
| 8.43 | 1.03 | 443 | ||||||||||
| Temperature0/ºC | 21 | 540 | 650 | 760 | 870 | |||||||
| Modulus of elasticity | 214 | 184 | 176 | 168 | 157 | |||||||
| Thermal Conductivity | ||||||||||||
| θ/ºC | 20 | 100 | 200 | 300 | 400 | 500 | 600 | 700 | 800 | 900 | 1000 | |
| λ//(W/(mºC)) | 12.85 | 13.94 | 15.15 | 16.62 | 18.71 | 20.72 | 22.40 | 24.49 | 27.00 | 29.51 | 31.60 | |
| Coefficient of Linear Expansion | ||||||||||||
| θ/ºC | 20~200 | 20~ 00 | 20~400 | 20~500 | 20~600 | 20~700 | 20~800 | 20~1000 | ||||
| a/10-6ºC-1 | 12.35 | 12.75 | 13.10 | 13.55 | 14.50 | 15.15 | 15.70 | 16.20 | ||||
| Chemical Property | ||||||||||||
| θ/ºC | 800 | 900 | 1000 | |||||||||
| Oxidation rate/(g/m2 -h) | 0.01865 | 0.05724 | 0.13718 | |||||||||
| Mechanical Property:Performance Specified In Technical Standards | ||||||||||||
| Variety | θ/ºC | tensile property | HBS | bending test | ||||||||
| σb/MPa | OP0.2/MPa | 05/% | φ/% | |||||||||
| Bar | 20 | ≥585 | ≥240 | ≥30 | 134~217 | |||||||
| A round cake, a circular blank, or a ring | 20 | ≥520 | ≥205 | ≥35 | ≥187 | |||||||
| hot rolled plate | 20 | ≥550 | ≥240 | ≥35 | ≥40 | |||||||
| 900 | ≥95 | ≥45 | ≥40 | ≥50 | ||||||||
| cold-rolled sheet | 20 | 2550 | ≥240 | ≥30 | 1 | |||||||
| 900 | ≥90 | ≥40 | ≥60 | |||||||||
| cold-rolled sheet | 20 | ≥550 | ≥200 | ≥30 | test | |||||||
| strip | 20 | ≥550 | ≥240 | ≥30 | 1 | |||||||
| wire | 20 | Actual measurement | Actual measurement | Actual measurement | HV≤151 | Cold forging pass | ||||||
| Table | ||||||||||||
| Product thickness/mm | <0.25 | 0.25~1.30 | >1.30~4.00 | |||||||||
| Bending coefficient | Mutual agreement | 1 | 2 | |||||||||
